with mower: 1590 mm (62.6 in.) | with mower (deflector raised for storage): 1335 mm (52.6 in.) | without mower: 1000 mm (39.4 in.)
Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1244 mm (49 in.)
Specifications
2025
John Deere
X300 Select Series
X390
Riding
Model: FR691V
17.2 kW (23 hp)
726 cc (44.3 cu in.)
Overhead valve, full-pressure lube, oil filter
V-twin, cast-iron liners
Mechanical
method: Air
Dry, replaceable
Bendix
delivery: Pulse pump, carburetor
Gasoline | Fuel tank location: Rear
Gauge on dash
speed control: Separate levers, automatic choke return
Power, hydraulic | Tilt wheel: five position
Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
Internal wet disc
22x11-10
15x6.5-8
Mower: Four
12 V / 340 CCA
Flywheel alternator, regulated, 12 amp
Forward: 0-10 km/h (0-6.2 mph) | Reverse: 0-5.6 km/h (0-3.5 mph)
mounting: Yes, heavy duty
Welded heavy-duty
Headlights: Two standard, incandescent, 27 W
Backup protection: Reverse Implement Option (RIO)
Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel - Large: 35.6 cm (14 in.) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 17 cm (6.6 in.) | Mower deck material: 10 gauge 3.4 mm (0.135 in.) | Mower wheels rotate: 90 degrees for easy mower removal
Accel Deep™ mower deck: 122 cm (48 in.)
55.9 cm (22 in) | Uncut circle: 61 cm (24 in.)
back: 46 cm (18 in.)
Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1244 mm (49 in.)
1836 mm (72.3 in.)
1255 mm (49.4 in.)
with mower: 1590 mm (62.6 in.) | with mower (deflector raised for storage): 1335 mm (52.6 in.) | without mower: 1000 mm (39.4 in.)
tank: 12.5 L (3.3 U.S. gal.)
Maximum: 272 kg (600 lb)
308 kg (678 lb)
Transaxle type: K58 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, under seat and covered toolbox | Mower deck: Side discharge | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, not replaceable
Hydraulic | system type: Foot pedal with adjustable spring assist
Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
Fender: Stamped steel
Cut-and-sewn high-back | suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight