2024 Kunz Engineering Finish Cut Mower AcrEase C60BE

Information

2024 Kunz Engineering Finish Cut Mower AcrEase C60BE

60" class commercial grade model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great as an add-on to the side of a riding mower, zero turn mower or small tractor for larger yards. Can also be pulled with an ATV or UTV.

Features may include:

  • 60" Class
  • 23 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
  • Commercial Grade
  • 4 Tire Design
  • Electric Clutch Blade Engagement
  • 23HP Briggs & Stratton CXi Series commercial grade twin cylinder engine
  • The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 25mm (1") steel shafts and large sealed ball bearings.
  • The cutting height can accurately be adjusted from 1"-4" with the 4-point height adjust system.
  • The main deck is built out of 10 GA (.135") thick steel with a 7 GA (.179") thick steel top plate for reinforcement.
  • Six anti-scalp wheels and safety zones are located in the front and rear of the mower.
  • The blades are engaged with an electric clutch which is activated by simply pulling a switch.
  • Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.

Photos

Highlights

  • Sunbury, Pennsylvania
  • 2024
  • Kunz Engineering
  • Finish Cut Mower AcrEase C60BE
  • Commercial CXi Twin Cylinder
  • Available
  • Cutting (infinite adjust each wheel): 1.0 – 4.0"

Specifications

  • 2024
  • Kunz Engineering
  • Finish Cut Mower AcrEase
  • C60BE
  • General
  • Commercial CXi Twin Cylinder
  • OHV Briggs & Stratton Commercial
  • 23 HP
  • Pressure With Filter
  • Cyclonic Air Filtration System
  • Blade Engagement: Electric Clutch
  • Pneumatic Fixed: 13/500×6, 2 Ply Turf
  • On Casters: 9/350×4, Slick (Flat Proof Urethane)
  • Blade Tip Speed: 17,500 (ft/min)
  • Mower Blades: 20" | Blade Spindles: 25mm Shaft (.984″)
  • 58"
  • Cutting (infinite adjust each wheel): 1.0 – 4.0"
  • 10 GA | Deck Top Plate Thickness (Additional Layer): 7 GA
  • 3 Gal.
  • 390 lbs
  • Number of Mower Blades: 3 | # Anti-Scalp Wheels Under Deck: 6 w/Front Skids (4 Front, 2 Rear) | Bearing #: 6205-2 RST | Drive Method: 1 B Section “V” Belt
  • 1 Year Commercial | Engine: 3 Year Commercial