2024 Kunz Engineering Finish Cut Mower AcrEase H60B
- Year 2024
- Make Kunz Engineering
- Model Finish Cut Mower AcrEase
- Engine EX Series Single Cylinder
2024 Kunz Engineering Finish Cut Mower AcrEase H60B
2024 Kunz Engineering Finish Cut Mower AcrEase H60B
High Quality Pull Behind Finish Cut Mower AcrEase Model H60B60? class homeowner grade model with a single cylinder electric start engine and centrifugal blade engagement. Works great as an add-on to the side of a riding mower, zero turn mower or small tractor for larger yards. Can also be pulled with an ATV or UTV.
Features may include:- 60? Class
- 19 HP Briggs & Stratton Engine
- Heavy Duty Homeowner Grade
- 4 Tire Design
- Centrifugal Clutch Blade Engagement
- Not for sale in California.
- 19HP Briggs & Stratton EX Series non-commercial grade single cylinder engine
- The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 25mm (1") steel shafts and large sealed ball bearings.
- The cutting height can accurately be adjusted from 1"-4" with the 4-point height adjust system.
- The main deck is built out of 11 GA (.120") thick steel with an 11 GA (.120") thick steel top plate for reinforcement.
- Deep deck design with wide side discharge and inline blades for added capacity
- Six anti-scalp wheels and safety zones are located in the front and rear of the mower.
- The centrifugal clutch is engaged by simply increasing the engine rpm.
- Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.
Engine
Engine Manufacturer
OHV Briggs & Stratton
Engine
EX Series Single Cylinder
Engine Power
19 HP
Lubrication
Partial Pressure With Filter
Air Filter
Std. Air Filter with Pre-Cleaner
Drivetrain
Clutch
Blade Engagement: Centrifugal | Engagement Speed: 1850 RPM
Wheels & Tires
Rear Tire
Pneumatic Fixed: 13/500×6, 2 Ply Turf
Front Tire
On Casters: 9/350×4, Slick (Flat Proof Urethane)
Operational
Operating Speed
Blade Tip Speed: 17,500 (ft/min)
Dimensions
Cutting Width
58"
Height
Cutting (infinite adjust each wheel): 1.0 – 4.0"
Deck Thickness
11 GA | Deck Top Plate Thickness (Additional Layer): 11 GA
Dimensions
Mower Blades: 20" | Blade Spindles: 25mm Shaft (.984″)
Capacities
Fuel Capacity
3 Gal.
Weights
Weight
325 lbs
Features
Features
Number of Mower Blades: 3 | # Anti-Scalp Wheels Under Deck: 6 (4 Front, 2 Rear) | Bearing #: 6205-2 RST | Drive Method: 1 B Section “V” Belt
Warranty
Warranty
1 Year Residential | Engine: 1 Year Commercial/2 Year Residential