2024 Kunz Engineering Finish Cut Mower AcrEase H60B

Information

2024 Kunz Engineering Finish Cut Mower AcrEase H60B

High Quality Pull Behind Finish Cut Mower AcrEase Model H60B

60? class homeowner grade model with a single cylinder electric start engine and centrifugal blade engagement. Works great as an add-on to the side of a riding mower, zero turn mower or small tractor for larger yards. Can also be pulled with an ATV or UTV.

Features may include:
  • 60? Class
  • 19 HP Briggs & Stratton Engine
  • Heavy Duty Homeowner Grade
  • 4 Tire Design
  • Centrifugal Clutch Blade Engagement
  • Not for sale in California.
  • 19HP Briggs & Stratton EX Series non-commercial grade single cylinder engine
  • The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 25mm (1") steel shafts and large sealed ball bearings.
  • The cutting height can accurately be adjusted from 1"-4" with the 4-point height adjust system.
  • The main deck is built out of 11 GA (.120") thick steel with an 11 GA (.120") thick steel top plate for reinforcement.
  • Deep deck design with wide side discharge and inline blades for added capacity
  • Six anti-scalp wheels and safety zones are located in the front and rear of the mower.
  • The centrifugal clutch is engaged by simply increasing the engine rpm.
  • Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.

Photos

Highlights

  • Sunbury, Pennsylvania
  • 2024
  • Kunz Engineering
  • Finish Cut Mower AcrEase H60B
  • EX Series Single Cylinder
  • Available
  • Cutting (infinite adjust each wheel): 1.0 – 4.0"

Specifications

  • 2024
  • Kunz Engineering
  • Finish Cut Mower AcrEase
  • H60B
  • General
  • EX Series Single Cylinder
  • OHV Briggs & Stratton
  • 19 HP
  • Partial Pressure With Filter
  • Std. Air Filter with Pre-Cleaner
  • Blade Engagement: Centrifugal | Engagement Speed: 1850 RPM
  • Pneumatic Fixed: 13/500×6, 2 Ply Turf
  • On Casters: 9/350×4, Slick (Flat Proof Urethane)
  • Blade Tip Speed: 17,500 (ft/min)
  • Mower Blades: 20" | Blade Spindles: 25mm Shaft (.984″)
  • 58"
  • Cutting (infinite adjust each wheel): 1.0 – 4.0"
  • 11 GA | Deck Top Plate Thickness (Additional Layer): 11 GA
  • 3 Gal.
  • 325 lbs
  • Number of Mower Blades: 3 | # Anti-Scalp Wheels Under Deck: 6 (4 Front, 2 Rear) | Bearing #: 6205-2 RST | Drive Method: 1 B Section “V” Belt
  • 1 Year Residential | Engine: 1 Year Commercial/2 Year Residential