2024 Kunz Engineering Rough Cut Mower AcrEase MR55BE
- Year 2024
- Make Kunz Engineering
- Model Rough Cut Mower AcrEase
- Engine Model: Commercial CXi Twin Cylinder
2024 Kunz Engineering Rough Cut Mower AcrEase MR55BE
Commercial Grade Pull Behind Rough Cut Mower AcrEase Model MR55BETop of the line commercial grade 57" rough cut model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great behind an ATV, UTV or small tractor for larger acreage jobs.
Features may include:- 57" Cutting Width
- 27 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
- Heaviest Duty and Highest Performance Pull Behind Mower in the Industry
- 4 Tire Design with Large 15" Diameter Tires
- Quick Two Crank Height Adjust System
- Height Adjustment Range From 2" to 8"
- Electric Clutch Blade Engagement
- Conservative 2" Diameter Sapling Rating
- Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
- Not for sale in California unless specifically used for agriculture. Please call for additional information.
- 27HP Briggs & Stratton CXi Series commercial grade twin cylinder engine
- The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.
- The cutting height can quickly and easily be adjusted from 2"-8" with the two crank height adjustment system.
- The main deck is built out of 10 GA (.135") thick steel with a 1/4" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just over 5/8" thick.
- Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
- The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance.
- The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
- Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time
Engine
							Engine Manufacturer
							OHV Briggs & Stratton Commercial
						
						
							Engine
							Model: Commercial CXi Twin Cylinder
						
						
							Engine Power
							27 hp
						
						
							Lubrication
							Pressure With Filter (Low Oil Pressure Shut-Off Included)
						
						
							Air Filter
							Cyclonic Air Filtration System
						
						Drivetrain
							Drive System
							Drive Method: 1 B Section "V" Belt (Kevlar)
						
						Wheels & Tires
							Tires, Rear Specification
							15/600×6, 4 Ply Tubeless 
						
						
							Tires, Front Specification
							5.30/4.50×6, 4 Ply Tubeless 
						
						Operational
							Operating Speed
							Blade Tip Speed (ft/mm): 19000
						
						Chassis
							Deck Thickness
							Metal: 10 GA (.135") | Top Plate: Two 1/4" Thick Plates
						
						Dimensions
							Cutting Width
							57"
						
						
							Height
							Cutting: 2.0 to 8.0 By Two Cranks
						
						
							Dimensions
							Shaft Size: 30 mm (1-3/16")
						
						Capacities
							Fuel Capacity
							3 Gal.
						
						Weights
							Weight
							580 lbs
						
						Features
							Features
							Class Mower: Rough Cut (Rear Discharge) | Number of Mower Blades: 2-30" | Hitch: Direct Behind or Full Offset to Either Side | Blade Engagement Clutch: Electric Clutch | Bearing#: 6206-2RST
						
						Warranty
							Warranty
							1 Year Commercial | Engine: 3 Year Commercial
						
					 
						