Country Turf & Trail LLC

  • 129 School House Rd
  • Sunbury, PA 17801
  • Call Us: (570) 286-0200
  • //www.countryturfandtrail.com/
Print This Page

2024 Kunz Engineering Rough Cut Mower AcrEase MR55BE

Information

2024 Kunz Engineering Rough Cut Mower AcrEase MR55BE

Commercial Grade Pull Behind Rough Cut Mower AcrEase Model MR55BE

Top of the line commercial grade 57" rough cut model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great behind an ATV, UTV or small tractor for larger acreage jobs.

Features may include:
  • 57" Cutting Width
  • 27 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
  • Heaviest Duty and Highest Performance Pull Behind Mower in the Industry
  • 4 Tire Design with Large 15" Diameter Tires
  • Quick Two Crank Height Adjust System
  • Height Adjustment Range From 2" to 8"
  • Electric Clutch Blade Engagement
  • Conservative 2" Diameter Sapling Rating
  • Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
  • Not for sale in California unless specifically used for agriculture. Please call for additional information.
  • 27HP Briggs & Stratton CXi Series commercial grade twin cylinder engine
  • The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.
  • The cutting height can quickly and easily be adjusted from 2"-8" with the two crank height adjustment system.
  • The main deck is built out of 10 GA (.135") thick steel with a 1/4" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just over 5/8" thick.
  • Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
  • The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance.
  • The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
  • Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time

Photos

Highlights

  • Sunbury, Pennsylvania
  • 2024
  • Kunz Engineering
  • Rough Cut Mower AcrEase MR55BE
  • Model: Commercial CXi Twin Cylinder
  • Available
  • Cutting: 2.0 to 8.0 By Two Cranks

Specifications

  • 2024
  • Kunz Engineering
  • Rough Cut Mower AcrEase
  • MR55BE
  • General
  • Model: Commercial CXi Twin Cylinder
  • OHV Briggs & Stratton Commercial
  • 27 hp
  • Pressure With Filter (Low Oil Pressure Shut-Off Included)
  • Cyclonic Air Filtration System
  • Drive Method: 1 B Section "V" Belt (Kevlar)
  • 15/600×6, 4 Ply Tubeless
  • 5.30/4.50×6, 4 Ply Tubeless
  • Blade Tip Speed (ft/mm): 19000
  • Metal: 10 GA (.135") | Top Plate: Two 1/4" Thick Plates
  • Shaft Size: 30 mm (1-3/16")
  • 57"
  • Cutting: 2.0 to 8.0 By Two Cranks
  • 3 Gal.
  • 580 lbs
  • Class Mower: Rough Cut (Rear Discharge) | Number of Mower Blades: 2-30" | Hitch: Direct Behind or Full Offset to Either Side | Blade Engagement Clutch: Electric Clutch | Bearing#: 6206-2RST
  • 1 Year Commercial | Engine: 3 Year Commercial